EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #588 background imageLoading...
Page #588 background image
RPD_LDP_INTF_UNBLOCKED
System Log Message LDP interface interface-name is now unblocked
Description The indicated interface returned to the normal Label Distribution Protocol (LDP)
operational state. It was previously blocked because the routing protocol process (rpd)
noticed that a duplicate session ID was being used.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_LDP_NBRDOWN
System Log Message LDP neighbor neighbor-addressi (interface-name) is down
Description A Label Distribution Protocol (LDP) adjacency was terminated because the indicated
neighbor stopped communicating. If the adjacency was the only one with this neighbor,
the routing protocol process (rpd) terminated the associated LDP session.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_LDP_NBRUP
System Log Message LDP neighbor neighbor-addressi (interface-name) is up
Description A Label Distribution Protocol (LDP) adjacency with the indicated neighbor became active.
The routing protocol process (rpd) established an LDP session with the neighbor if one
did not already exist.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_LDP_PING_DOWN
System Log Message LDP LSP ping failure for FEC fec-address
Description The routing protocol process (rpd) determined that LSP ping returned error for the
indicated forwarding equivalence class (FEC) of Label Distribution Protocol (LDP).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.524
Junos 10.3 System Log Messages Reference

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals