Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The prefix length for the indicated prefix is too short and it has a non-zero host portion.
Excess host bits will be ignored.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
RPD_PPM_READ_ERROR
System Log Message Read error on pipe from ppmd: reason (error-message)
Description The routing protocol process (rpd) could not read a message available on the read pipe
from the periodic packet management process (ppmd).
Type Error: An error occurred
Severity info
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_PPM_WRITE_ERROR
System Log Message function-name: write error on pipe to ppmd (error-message)
Description The routing protocol process (rpd) could not write a message on the pipe to the periodic
packet management process (ppmd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_RA_CFG_CREATE_ENTRY_FAILED
System Log Message Could not create entry for entry.
Description The configuration request failed because the IPv6 routing advertisements failed to create
the indicate configuration entry.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.550
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English