Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 666

Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_HEALTH_MON_THRESH_CROSS
System Log Message syslog-subtagdelimiterevent-name
Description A system parameter monitored by the self-monitoring feature crossed a rising or falling
threshold.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Cause System resources were being consumed.
SNMPD_INIT_FAILED
System Log Message snmpd initialization failure: error-message
Description Initialization of the Simple Network Management Protocol (SNMP) agent process
(snmpd) failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_LIBJUNIPER_FAILURE
System Log Message function-name: system_default_inaddr: error-message
Description The indicated function from the Juniper Networks Simple Network Management Protocol
(SNMP) library failed and returned the indicated error to the SNMP agent process
(snmpd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.602
Junos 10.3 System Log Messages Reference