Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
SNMPD_SEND_FAILURE
System Log Message function-name: send type (index1) failure: error-message
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
send either a protocol data unit (PDU) to the User Datagram Protocol (UDP) or a message
to a subagent.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_SET_FAILED
System Log Message Snmp set failed: error-message
Description Configuration data was changed using an Simple Network Management Protocol (SNMP)
Set request, but the SNMP agent process (snmpd) could not save the changes to the
configuration database.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_SMOID_GEN_FAILURE
System Log Message Unable to generate OID from product-name (error-message)
Description The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a value for the self-monitoring object identifier (OID) of the indicated product.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
605Copyright © 2010, Juniper Networks, Inc.
Chapter 82: SNMPD System Log Messages