EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #688 background imageLoading...
Page #688 background image
Type Error: An error occurred
Severity error
Facility ANY
Cause Either the process is leaking memory or the use of system resources is excessive.
Action Increase the amount of RAM in the Routing Engine.
TASK_SCHED_CALLBACK_LONGRUNTIME
System Log Message function-name: excessive runtime time during action of module
Description The indicated submodule of this process ran uninterrupted for the indicated period of
time, which is considered excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Cause The duration was noted because task accounting is enabled. The function might be
implemented inefficiently.
TASK_SCHED_CUMULATIVE_RUNTIME
System Log Message function-name: excessive runtime (total of time in count callbacks) after action of module
Description Several submodules of this process ran uninterrupted for the indicated period of time,
which is considered excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Cause The duration was noted because task accounting is enabled. The function might be
implemented inefficiently.
TASK_SCHED_MODULE_LONGRUNTIME
System Log Message function-name: excessive runtime time during action of module
Description Several submodules of this process ran uninterrupted for the indicated period of time,
which is considered excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Copyright © 2010, Juniper Networks, Inc.624
Junos 10.3 System Log Messages Reference

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals