TASK_TASK_BEGIN
System Log Message Commencing virtual chassis control daemon, version process-version, built date by builder
Description The process started.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
TASK_TASK_CHILDKILLED
System Log Message task-name terminated by SIGsignal-namecore-dump-status
Description While a child process was performing the indicated operation, it terminated in response
to the indicated signal.
Type Event: This message reports an event, not an error
Severity error
Facility ANY
TASK_TASK_CHILDSTOPPED
System Log Message task-name stopped by SIGsignal-name
Description While a child process was performing the indicated operation, it stopped in response to
the indicated signal.
Type Event: This message reports an event, not an error
Severity error
Facility ANY
TASK_TASK_FORK
System Log Message Unable to fork task-name: error-message
Description This process failed to create the indicated child process.
Type Error: An error occurred
Severity error
Facility ANY
TASK_TASK_GETWD
System Log Message getwd: error-message
Description The getwd() system call failed.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.626
Junos 10.3 System Log Messages Reference
To Next Page
Loading...