TFTPD_NAK_ERR
System Log Message nak error error-code, error-message
Description The TFTP process (tnp.tftpd) sent a negative acknowledgment to a client because of
the indicated error condition.
Type Error: An error occurred
Severity warning
Facility ANY
TFTPD_OPEN_ERR
System Log Message Unable to open file 'filename', error: error-message
Description The TFTP process (tnp.tftpd) could not open the indicated file because of the indicated
error.
Type Error: An error occurred
Severity warning
Facility ANY
TFTPD_RECVCOMPLETE_INFO
System Log Message Received count blocks of block-size size for file 'filename'
Description The TFTP process (tnp.tftpd) received the last portion of a transmitted file. This message
records the number of blocks received, the block size used, and the name of the file to
which the data was written.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
TFTPD_RECVFROM_ERR
System Log Message recvfrom: error-message
Description The TFTP process (tnp.tftpd) issued the recvfrom() system call when attempting to
receive data from the network. The system call failed.
Type Error: An error occurred
Severity error
Facility ANY
TFTPD_RECV_ERR
System Log Message recv: error-message
Description The TFTP process (tnp.tftpd) could not receive data from the network.
631Copyright © 2010, Juniper Networks, Inc.
Chapter 87: TFTPD System Log Messages
To Next Page
Loading...