Component:
Task
Daily
A250
A500
A1000
A1500
A2000
A3000
A36000
See
chapter
Note
Clean the fuel tank. X
Check fuel lines and hose
clamping bands, have replaced
if necessary.
X SW
Change the fuel pre-filter. X 10.3.3 Engine
SM
Replace the fuel micro-filter. X 10.3.3 Engine
SM
Check the fuel return line for
leakage and firm fixing.
X
Have the fuel injectors checked. X SW
Have the fuel injector pump
checked.
X SW
Check the battery electrolyte
level and connections.
X 10.3.7
Compressor:
Check inlet air filter mainte‐
nance indicator.
X 10.4.7
Check the cooling oil level. X 10.4.1
Clean the compressor air filter. X 10.4.7
Clean the oil cooler. X 10.5
Have the safety relief valve(s)
checked.
X 10.4.8
Check/clean the oil separator
tank dirt trap.
X 10.4.5
Change the compressor air fil‐
ter.
X 10.4.7
Change the cooling oil. X 10.4.3
Change the compressor oil filter. X 10.4.4
Change the separator cartridge
in the oil separator tank.
X 10.4.6
Wheels/chassis/bodywork:
Check the tire pressure. X
Check wheel bolts and nuts for
tightness.
X
Have the axial play of the wheel
bearing checked and adjusted, if
necessary. Have the tapered
roller bearing lubricated.
X 10.7.2 SW
Engine SM = Engine manufacturer's service manual; SW = Specialized workshop
10 Maintenance
10.2 Maintenance schedules
106
Operator Manual Screw Compressor
M27
No.: 9_9548 05 USE
To Next Page
Loading...
