Annual inspection by trained and authorized electrician:
➤
Inspect the generator and generator control cubicle for mechanical damages.
➤ Inspect the protective conductor.
➤ Measure the dielectric resistance.
➤ Measure the substitute leakage current.
➤ Test the generator functionality.
➤ Test the proper functioning of the generator fan and clean, if required.
➤ Clean the cooling air openings.
➤ Check and tighten the screw connections at the generator and the generator control cubicle.
➤ Check covers and power socket caps for damage and good sealing.
➤ Check the completeness of labeling and warning labels.
3.9 Emergency situations
3.9.1 Correct fire fighting
Suitable measures
Calm and prudent action can safe lives in the event of a fire.
➤ Keep calm.
➤ Give the alarm.
➤ Shut down the machine from the instrument panel if possible.
➤ Warn and move endangered personnel to safety.
➤ Help incapacitated persons.
➤ Close the doors.
➤ When trained accordingly: Attempt to extinguish the fire.
Extinguishing substances
➤ Suitable extinguishing media:
Foam
Carbon dioxide
Sand or soil
➤ Unsuitable extinguishing media:
Strong jet of water
3.9.2 Injury from handling operating fluids/materials
The following operating fluids/materials are in the machine:
■ Fuel
■ Lubricating oils
■ Compressor cooling oil
■ Engine coolant
■ Battery electrolyte
■ Tool lubricant (Option ea)
■ Antifreeze (Option ba)
3 Safety and Responsibility
3.9 Emergency situations
34
Operator Manual Screw Compressor
M27 No.: 9_9548 05 USE
To Next Page
Loading...
