3.5.3 Organizational Measures
➤ Designate personnel and their responsibilities.
➤
Give clear instructions on reporting faults and damage to the machine.
➤ Give instructions on fire reporting and fire-fighting measures.
3.5.4 Danger areas
The table gives information on areas dangerous to personnel.
Only authorized personnel may enter these areas.
Task Danger area Authorized personnel
Transport Within a 10 ft radius of the machine. Operating personnel to prepare for trans‐
port.
No personnel during transport.
Beneath the lifted machine. No personnel!
Commissioning Within the machine.
Within a 3 ft radius of the machine.
Maintenance personnel
Operation Within a 3 ft radius of the machine. Operating personnel
Maintenance Within the machine.
Within a 3 ft radius of the machine.
Maintenance personnel
Tab. 57 Danger areas
3.6 Safety devices
Safety devices ensure safe working with the machine.
➤
Do not change, bypass or disable safety devices.
➤ Regularly check safety devices for their correct function.
➤ Do not remove or obliterate labels and notices.
➤ Ensure that labels and notices are clearly legible.
Further information More information on safety devices is contained in chapter 4.5.
3.7 Safety signs
The diagram shows the locations of safety signs on the machine. The table lists the various safety
signs used and their meanings.
3 Safety and Responsibility
3.6 Safety devices
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
29
To Next Page
Loading...
