6 Installation
6.1 Ensuring safety
Follow the instructions below for safe installation.
Warning instructions are located before a potentially dangerous task.
Disregard of warning instructions can cause serious injuries!
Complying with safety warnings
Disregard of safety warnings can cause unforeseeable dangers!
➤
Follow the instructions in chapter 3 “Safety and Responsibility”.
➤ Installation work may only be carried out by authorized personnel.
Further information Details of authorized personnel are found in chapter 3.4.2.
Details of dangers and their avoidance are found in chapter 3.5.
6.2 Reporting Transport Damage
1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage found.
6.3 Fitting the towbar
For space reasons, the machine is mounted on a transport frame when delivered.
■ Shifted adapter 7
of the height-adjustable towing device.
■
Disassembled adapter 7
of the height-adjustable towing device.
■
Shifted fixed-height towing device.
■ Disassembled fixed-height towing device.
Prior to removal of the transport frame, you must loosen the transport securing means and install
and/or adjust the towing device.
Material Protective gloves
Wrench
Hard rubber hammer
Precondition The machine is standing firm and level.
The machine is switched off.
Pinch hazard!
Severe pinching injury to fingers is possible.
➤ Always wear protective gloves.
➤ Work with caution.
6 Installation
6.1 Ensuring safety
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
55
To Next Page
Loading...
