KAESER M27 - Fig. 58 Adjusting the Bearing Play

Fig. 58 Adjusting the bearing play
1 Protective cap
2 Locknut
3 New locknut
4 Bearing journal
5 Wheel hub
6 Wheel bolt
1. Remove the protective cap.
2.
Remove the locknut.
3. Immediately dispose of the old locknut.
4. Place the new locknut onto the thread.
5. Tighten the new locknut with the specified torque, see also subsequent description "Installing
the wheel bearing".
6. Drive the collar of the locknut, see also subsequent description "Securing the locknut against
loosening", Fig. 61.
7. Place the protective cap.
Removing the wheel bearing
Example: The wheel bearing must be removed before further maintenance tasks such as cleaning,
checking and lubricating can be executed.
10 Maintenance
10.7 Chassis maintenance
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
147