KAESER M27 - Ambient Conditions; Additional Specifications; Chassis; Weight of Machines Approved for Towing on Public Roads

2.3.2.1 Torque cover fixing screws oil separator tank
Recommended values for screws corresponding to the strength category:
Screws Strength category Thread Torque [lbf in]
Hex-head screw 5.6 M12 332
Tab. 21 Torque cover fixing screws oil separator tank
2.3.2.2 Torques for lifting eye
Recommended values for screws corresponding to the strength category:
Screws Strength category Thread Torque [lbf in]
Hex-head screw 8.8 M12 708
Stud 8.8 M12 708
Tab. 22 Torques for lifting eye screws
2.3.3 Ambient conditions
Positioning Limit value
Maximum altitude amsl* [ft] 3000
Minimum ambient temperature [°F] 14
Maximum ambient temperature [°F] 113
* Higher altitudes are permissible only after consultation with the manufacturer.
Tab. 23 Ambient conditions
2.3.4 Additional specifications
For specifications, according to the machine's operating license, such as:
■
dimensions,
■ track width,
■ footprint,
can be found in the dimensioned drawings in Chapter 13.3.
The dimensional drawings also show the position of the following inlets and outlets:
■
Cooling air inlet
■ Cooling air outlet
■ Compressed air outlet
■ Exhaust
2.4 Chassis
2.4.1 Option rb/rm/rr, rb/rm/rs, rc/ro/rr, rg/rp/rr, rc/ro/rs, rd/ro/rr
Weight of machines approved for towing on public roads
Actual weight of individual machines is dependent on equipment fitted (see machine nameplate).
2 Technical Data
2.4 Chassis
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
9