2 Technical Data
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine (see illustration in chapter
13.1).
➤ Enter the nameplate data here as a reference:
Feature Value
Vehicle Identification No.
Permissible total weight
Permissible coupling load
Permissible axle load
Portable compressor
Part no.
Serial no.
Year of manufacture
Total weight
Lifting point load capacity
Rated engine power
Engine speed
Maximum working pressure
Tab. 3 Nameplate
2.2 Options
A list of the options fitted to your machine helps to relate the information in this service manual.
A list of the options fitted is given as code letters on the right side of the options label.
The nameplate can be found:
■
on the outside of the machine,
■ on the front of the machine (see chapter 13.1)
The following table lists all possible options.
Only the codes for those options fitted appear on the nameplate.
2 Technical Data
2.1 Nameplate
4
Operator Manual Screw Compressor
M27
No.: 9_9548 05 USE
To Next Page
Loading...
Need help?
General
