Characteristic SIGMA FLUID
Oil grade S–460 MOL
Application Standard oil for all applications except in
connection with foodstuffs.
Particularly suitable for machines with a
high duty cycle.
Standard oil for all applications
except in connection with food‐
stuffs.
Particularly suitable for machines
with a low duty cycle.
Approval — —
Viscosity at 104 °F
45 mm
2
/s
(D 445; ASTM test)
44 mm
2
/s
(DIN 51562–1)
Viscosity at
212 °F
7.2 mm
2
/s
(D 445; ASTM test)
6.8 mm
2
/s
(DIN 51562–1)
Flash point 460 °F
(D 92; ASTM test)
428 °F
(ISO 2592)
Density at 59 °F
864 kg/m
3
(ISO 12185)
–
Pour point -50.8 °F
(D 97; ASTM test)
-27.4 °F
(ISO 3016)
Demulsibility at 29 °F 40/40/0/10 min
(D 1401; ASTM test)
–
Tab. 33 Cooling oil recommendation
2.5.7 Cooling oil charge
Cooling oil Fluid volume [qt]
Machine 5.3
Compressor unit + heat exchanger
(Option db)
5.3
Tab. 34 Cooling oil charge
2.6 Engine
2.6.1 Engine data
Feature Specification
Make/Model Kubota D-1105
Engine control Mechanical
Fuel injection Mechanical
Rated engine power [hp] 24.8
Speed at LOAD mode [rpm] 2850
speed at IDLE mode [rpm] 2150
* Use only diesel fuel to EN 590 or ASTM D975. Consult the engine manufacturer on the use of
other fuels if necessary.
2 Technical Data
2.6 Engine
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
13
To Next Page
Loading...
