5.3
Selective Call Alert LED
Selective Call Alert LED is used to notify a user visually that the transceiver has received various calls.
When
receiving various calls, such as P25, NXDN, or DMR Individual Calls and Group Calls, the LED can flash any of the
following 7 colors, and the flashing color can be configured for each type of call:
0
Yellow
0
Purple
0
Blue
0
Light Blue
0
Red
0
Green
0
White
Configuration using KPG-D1/ D1N
0
Configuring Selective Call Alert LED in a P25 Conventional system (
Transceiver Settings > P25 > P25
Information > Conventional)
0
Configuring Selective
Call Alert LED in an NXDN Conventional system (
Transceiver
Settings > NXDN > NXDN
Information > Conventional)
0
Configuring Selective Call Alert LED in a DMR Conventional system (
Transceiver Settings > DMR > DMR
Information > Conventional)
0
Configuring Selective
Call Alert LED in a P25 Trunking system (
Transceiver
Settings > P25 > P25 Information
> Trunking)
0
Configuring Selective Call Alert LED in an NXDN Trunking system (
Transceiver Settings > NXDN > NXDN
Information > Trunking)
5 INDICATION AND DISPLAY
5.3 Selective Call Alert LED
Common FUNC (K, F)/Ver 2.20 89
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
