Receive a pairing request from a Bluetooth-compatible device.
When the transceiver receives a pairing request from a Bluetooth-compatible device, the Bluetooth device name or Bluetooth
device address appears on the transceiver and whether to connect can be selected.
If a pairing request from a Bluetooth-compatible device is received, the connection can be made by using either Headset
Profile or Serial Port Profile.
Operating the transceiver
0
If
a pairing request from a Bluetooth-compatible device not supporting Secure Simple Pairing is
received
1
Receive a pairing request from a Bluetooth-compatible device.
If the Bluetooth-compatible device is already registered in the transceiver, the connection process starts by HSP
Connection or SPP Connection without pairing occurring. Proceed to step 3.
If the Bluetooth-compatible device is not registered in the transceiver, the PIN Code entry screen appears and the
LED flashes blue.
If permitting pairing, enter the PIN Code. Proceed to step 2.
12 : 34
A
M
Input PIN Code
LMIC
If rejecting pairing, press the Home
([T]) key to end pairing. Also, pairing ends if 30 sec elapse without confirming
the entered PIN Code.
2
Enter the PIN Code.
Refer to “Entering or Deleting a Code” for entry methods.
12 : 34
A
M
123456
LMIC
Confrm Delete
Press the Menu ([Q]) or [*]
key.
A Key Beep A (1 beep) sounds from the transceiver and the transceiver checks whether the PIN Codes match.
Proceed to step 5.
Menu Zone
+
Zone 1
Channel 1
12 : 34
A
M
Connecting
10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
Common FUNC (K, F)/Ver 2.20 189
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
