Kenwood NX-5200K3 Common Function Reference

Entering or Deleting Characters
This section explains operations using operating examples for Short Message Mode.
0
Entering characters using the [G] and [H] keys
The following is the operation example to enter “JVC” in Short Message Mode.
Select "J".
Select "V".
Menu ([ ]) or [*] key (Select)
Menu ([ ]) or [*] key (Select)
12 : 34
A
M
Short Message
Message?
Back
12 : 34
A
M
Short Message
DeleteSelect
A
12 : 34
A
M
Short Message
DeleteSend
J
12 : 34
A
M
Short Message
J
DeleteSelect
J
12 : 34
A
M
Short Message
DeleteSend
JV
[ ] or [ ] key
[ ] or [ ] key
[ ] key
[ ] key
B C 8 9 A
[ ] key
[ ] key
L M 8 9 A
Note
0
The following are the main keys to be used for these operation examples:
To select a character: the [G] or [H] key
To determine: the Menu ([Q]) or [*] key
0
Pressing and holding the [G] or [H] key scrolls the character up or down.
0
Characters to be entered can be changed by the configuration in Character Entry. (Refer to Character Entry.)
0
E at the end of the entered string of text is the mark indicating the end position.
3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
Common FUNC (K, F)/Ver 2.20 63
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English