10.9
Configuring the Connection Destination of a Bluetooth-
compatible Device (Bluetooth Interface Selection)
Bluetooth Interface Selection is
the function to select whether to use the Bluetooth device equipped in the transceiver or
the Bluetooth device equipped in KCH-20R (Featured Panel) or KCH-21R (Handheld Control Head) when using KCH-20R
(Featured Panel) or KCH-21R (Handheld Control Head).
The transceiver, KCH-20R (Featured Panel), and KCH-21R (Handheld Control Head) have the Bluetooth device which
enables the Bluetooth function. When using KCH-20R (Featured Panel) or KCH-21R (Handheld Control Head), whether to
use the Bluetooth device equipped in the transceiver or the Bluetooth device equipped in KCH-20R (Featured Panel) or
KCH-21R (Handheld Control Head) needs to be configured.
If “RF Deck” is configured in Bluetooth Interface Selection, a Bluetooth-compatible device is connected to the transceiver.
If “Control Head” is configured in Bluetooth Interface Selection, a Bluetooth-compatible device is connected to KCH-20R
(Featured Panel) or KCH-21R (Handheld Control Head).
Configuration using KPG-D1/ D1N
Configuring Bluetooth Interface Selection
to be enabled or disabled (
Transceiver Settings > Optional Features
> Optional Features 2 > GPS/Bluetooth > Bluetooth)
10 BLUETOOTH COMMUNICATION
10.9 Configuring the Connection Destination of a Bluetooth-compatible Device (Bluetooth Interface Selection)
Common FUNC (K, F)/Ver 2.20 207
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
