Configuration in KPG-D1/ D1N If Control Heads Are Switched
1
Change the configuration of the Control Head in Product Information.
Each Control Head to be used is configured in Control Head 1 and Control Head 2 of Control Head
Configuration.
Figure 17-86 Product Information
Refer
to step 2 to step 6 of “Configuration in KPG-D1/ D1N if RF Decks Are Switched” for the configuration procedures
from here.
17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.11 About Configuration Using KPG-D1/ D1N
Common FUNC (K, F)/Ver 2.20 384
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
