Kenwood NX-5200K3 Common Function Reference

Sub-LCD Display Priority
Sub-LCD Display Priority
is the function to display the sub-display prioritizing the display contents configured in Sub-LCD
Display.
Table 5-6 Sub-LCD Display Priority
Configuration Description
High
The number display configured in Sub-LCD
Display has the highest priority. If a function to display
on the sub-display is activated while a function number configured in Sub-LCD Display appears
on the sub-display, after the string of text corresponding to the function is displayed for 1 sec, the
number display configured in Sub-LCD Display is restored.
However, if a function to display on the sub-display is activated while Sub-LCD Display is
configured as follows, the string of text corresponding to the function is displayed until the function
is reset:
0
When “None” is configured in Sub-LCD Display
0
When “OST List Number” is configured in Sub-LCD Display and nothing appears on the sub-
display, such as when the OST function is disabled or when the transceiver is on a digital
channel
Low
The number display configured in Sub-LCD
Display has the lowest priority. If a function to display
on the sub-display is activated, the string of text corresponding to the function is displayed until
the function is reset.
Configuration using KPG-D1/ D1N
Configuring Sub-LCD
Display Priority (
Transceiver Settings > Optional Features > Optional Features 1 > Display)
Clock Display
Clock Display is the function to display the clock on the display.
Configuration using KPG-D1/ D1N
Configuring Clock
Display to be enabled or disabled (
Transceiver
Settings > Optional Features > Optional Features
1 > Display)
5.12
Customizing a Displayed Text String (Display Customization)
Using KPG-D1/ D1N, this function can be used to change a string of text which appears on the LCD of the transceiver, such
as Function Mode and Key Guide.
The string of text that appears on the LCD of the transceiver can be changed to the function names used in other models.
Configuration using KPG-D1/ D1N
Changing the string of text that appears on the LCD of the transceiver ( Transceiver Settings > Display
Customization)
5 INDICATION AND DISPLAY
5.11 Display Functions of the Display
Common FUNC (K, F)/Ver 2.20 103
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English