Kenwood NX-5200K3 Common Function Reference

6.2
Tones that Sound When the Transceiver Receives a Call
An Alert Tone sounds from the transceiver such as when the transceiver receives a call using an Individual Call or a Group
Call, a Status Message, or a Short Message and notifies the user of the reception.
The Alert Tone pattern can be configured by selecting from 8 types of tones configured in Special Alert Tone. (Refer to
Configuring the Alert Tone (Alert Tone Pattern).)
Following are the types of Alert Tone.
Table 6-10 Alert Tone
P25 Conventional
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
Individual Call.
Alert Tone (Group Call)
This tone sounds from the transceiver when the transceiver receives a Group
Call.
Alert Tone (All Group Call)
This tone sounds from the transceiver when the transceiver receives an All
Group Call.
Alert Tone (Text Message Call)
This tone sounds from the transceiver when the transceiver receives a Text
Message Call.
Alert Tone (Emergency Response)
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives an Emergency Call.
P25 Trunking
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
Individual Call.
Alert Tone (Individual Call Incoming)
If Automatic Response is disabled, this tone sounds from the transceiver when
the transceiver receives an Individual Call.
Alert Tone (Group Call)
This tone sounds from the transceiver when the transceiver receives a Group
Call.
Alert Tone (System Call)
This tone sounds from the transceiver when the transceiver receives a System
Call.
Alert Tone (Paging Call)
This tone sounds from the transceiver when the transceiver receives a Paging
Call.
Alert Tone (Telephone Call)
This tone sounds from the transceiver when the transceiver receives a
Telephone Call.
Alert Tone (Emergency Response)
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives an Emergency Call.
NXDN Conventional
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
Individual Call.
Alert Tone (Individual Call Incoming)
If Automatic
Response is disabled, this tone sounds from the transceiver when
the transceiver receives an Individual Call (Individual Call Acknowledge
Request).
Alert Tone (Group Call)
This tone sounds from the transceiver when the transceiver receives a Group
Call.
Alert Tone (Paging Call)
This tone sounds from the transceiver when the transceiver receives a Paging
Call.
Alert Tone (Status/Short Message Call)
This tone sounds from the transceiver when the transceiver receives a Status
Message or a Short Message.
Alert Tone (Emergency Response)
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives an Emergency Call.
6 SOUND
6.2 Tones that Sound When the Transceiver Receives a Call
Common FUNC (K, F)/Ver 2.20 114
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English