Kenwood NX-5200K3 Common Function Reference

Sidetone
Sidetone sounds from the transceiver when the transceiver can communicate or the transceiver completes a transmission.
The volume level of Sidetone can be configured using KPG-D1/ D1N. (Refer to Configuring the Volume Level of Various
Tones (Tone Volume).)
Table 6-6 Sidetone
Function Description
Proceed Tone
This tone sounds from the transceiver when a connection to a repeater completes by pressing the
PTT switch in a P25 Trunking system or NXDN Trunking system.
In
a P25 Conventional system, NXDN Conventional system, and DMR Conventional system, this
tone is used to prevent missing the beginning of the audio to be transmitted. This tone can be
used with Proceed Tone Delay Time at the same time.
VOX Proceed Tone
This tone sounds from the transceiver when the transceiver starts transmitting by using the VOX
function.
PTT ID Sidetone
This tone sounds from the transceiver when the transceiver starts transmitting a FleetSync PTT
ID and MDC-1200 PTT ID.
Alert Tone
Alert Tone sounds from the transceiver when the transceiver receives various types of calls, Status Message, or Short
Message. (Refer to Tones that Sound When the Transceiver Receives a Call.)
The volume level of Alert Tone can be configured using KPG-D1/ D1N. (Refer to Configuring the Volume Level of Various
Tones (Tone Volume).)
Table 6-7 Alert Tone
Function Description
Special Alert Tone
This tone sounds from the transceiver when the transceiver receives various types of calls, Status
Message, or Short Message.
A
maximum of 8 types of tones can be arbitrarily configured or changed. (Refer to Configuring the
Alert Tone (Alert Tone Pattern).)
Transmit Clear Alert
Tone
This tone sounds from the transceiver when the transceiver starts transmitting without encrypting
audio data.
Site Trunking Alert
This tone sounds from the transceiver when the transceiver initiates a site trunking in a P25
Trunking system.
Ack Wait Enter Tone
This tone sounds from the transceiver when a Response Packet is received from the system when
sending a P25 Rekey Request in a P25 system.
Emergency Indicator
Alert Tone
This tone sounds from the transceiver when the transceiver receives an Emergency message in
a P25 system.
6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed
Common FUNC (K, F)/Ver 2.20 112
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English