Kenwood NX-5200K3 Common Function Reference

Entering or Deleting a Code
This section explains operations using operating examples for Individual Call Mode. The displays used in this section are
the displays when Individual Call Acknowledge Request
in an NXDN Conventional system is enabled.
0
Entering a code using the [G] or [H] key
The following is the operation example to enter “ID 12” in Individual Call Mode:
Select "1".
[ ] key
[ ] key
Menu ([ ]) or [*] key (Select)
Select "2".
Menu ([ ]) or [*] key (Select)
12 : 34
A
M
ID
Back
Individual
12 : 34
A
M
Individual
ID 1
DeleteSelect
12 : 34
A
M
Individual
ID 1
DeleteCall
12 : 34
A
M
Individual
ID 10
DeleteSelect
12 : 34
A
M
Individual
ID 12
DeleteCall
[ ] or [ ] key
[ ] or [ ] key
[ ] key
[ ] key
2 3 4 5 6
1 2
9 0 1
Note
0
The following are the main keys to be used for these operation examples:
To select a code: the [G] or [H] key
To determine: the Menu ([Q]) or [*] key
0
Pressing and holding the [G] or [H] key continuously scrolls the code up or down.
0
The code that can be entered varies depending on the mode and the number of entered digits.
3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
Common FUNC (K, F)/Ver 2.20 61
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English