Bluetooth can be used to wirelessly connect a Bluetooth-compatible device and the transceiver.
As the main method of use, wirelessly connecting by Bluetooth a Bluetooth-compatible headset and the transceiver can
execute a voice call using the mic and speaker of the headset.
Note
0
The transceiver complies with Bluetooth standard Version 3.0.
0
To wirelessly connect by Bluetooth a Bluetooth-compatible headset and the transceiver, the Bluetooth-compatible
headset needs to support HSP (Headset Profile).
Configuration using KPG-D1/ D1N
Configuring Built-in
GPS Receiver/Bluetooth to be enabled or disabled (
Transceiver Settings > Optional Features
> Optional Features 2 > GPS/Bluetooth)
10.1
Toggling Bluetooth On/ Off
To use various Bluetooth functions, Built-in GPS Receiver/Bluetooth needs to be enabled (On) by using KPG-D1/ D1N.
Also, Bluetooth can be toggled On and Off by operating the transceiver.
Pressing the Bluetooth key can toggle Bluetooth On and Off.
Or, pressing the Menu key causes the transceiver to enter Menu Mode, and then Bluetooth can be toggled On and Off by
selecting “On” or “Off”. (Refer to Using Menu Mode.)
Operating the transceiver
0
Enabling Bluetooth
1
Press the Bluetooth key when Bluetooth is disabled.
A Key Beep A (1 beep) sounds from the transceiver and the “V”
icon blinks.
The “V” icon lights when Bluetooth is enabled.
Menu Zone
+
Zone 1
Channel 1
12 : 34
A
M
Menu Zone
+
Zone 1
Channel 1
12 : 34
A
M
10 BLUETOOTH COMMUNICATION
10
BLUETOOTH COMMUNICATION
Common FUNC (K, F)/Ver 2.20 176
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
