Kenwood NX-5200K3 Common Function Reference

Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver ( Transceiver Settings > Key Assignment)
0
Configuring Key
Lock to be enabled or disabled (
Transceiver Settings > Key Assignment > General > Key Lock)
0
Configuring Mic Key to
be enabled or disabled (
Transceiver
Settings > Key Assignment > General > Key Lock)
Auto Key Lock Timer
Auto Key Lock Timer is the function to automatically enable the Key Lock when no key is operated after the Key Lock is
disabled.
If no key is operated for the amount of time configured in Auto Key Lock Timer after the Key Lock is disabled, the Key
Lock is automatically enabled.
Either 15 sec or 30 sec can be configured in Auto Key Lock Timer by using KPG-D1/ D1N.
Note
If the Key Lock function is assigned to the Lever switch, the Auto Key Lock function does not function.
Configuration using KPG-D1/ D1N
Configuring Auto Key Lock Timer ( Transceiver Settings > Optional Features > Optional Features 1 > Others)
3 BASIC OPERATIONS
3.9 Locking the Transceiver Keys (Key Lock)
Common FUNC (K, F)/Ver 2.20 72
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English