Kenwood NX-5200K3 Common Function Reference

5.4
Optional Signaling LED
Optional Signaling LED is the function to notify visually by flashing the LED yellow when the received Optional Signaling
matches
the Optional Signaling configured in the transceiver, or that the transceiver is in the state of voice communication
to a telephone.
A user can notice by the LED that the transceiver is receiving a call.
When Optional Signaling is no longer matching due to operation of the transceiver key or upon elapse of the time configured
in Auto Reset Timer, the light of the LED goes off.
However, if Selective Call Alert LED or Telephone Call Alert LED is enabled, the LED flashes according to the
configuration of Selective Call Alert LED or Telephone Call Alert LED even when Optional Signaling LED is enabled.
Configuration using KPG-D1/ D1N
0
Configuring Optional
Signaling LED in an NXDN Conventional system ( Transceiver
Settings > NXDN > NXDN
Information > Conventional)
0
Configuring Optional Signaling LED in a DMR Conventional system (
Transceiver Settings > DMR > DMR
Information > Conventional)
0
Configuring Optional Signaling LED in a P25 Conventional system ( Transceiver Settings > P25 > P25
Information > Conventional)
0
Configuring Optional Signaling LED in an NXDN Trunking system ( Transceiver Settings > NXDN > NXDN
Information > Trunking)
0
Configuring Optional Signaling LED
in a P25 Trunking system (
Transceiver Settings > P25 > P25 Information
> Trunking)
0
Configuring Optional
Signaling LED of MDC-1200 (
Transceiver Settings > MDC-1200 > MDC-1200 Information
> General)
0
Configuring Optional Signaling LED of FleetSync ( Transceiver Settings > FleetSync > FleetSync Information
> General)
0
Configuring Optional Signaling LED of DTMF ( Transceiver Settings > DTMF > Decode)
0
Configuring Optional Signaling LED of 2-tone
(
Transceiver Settings > 2-tone > 2-tone (Analog) > Decode (2-tone 1 to 4))
( Transceiver Settings > 2-tone > 2-tone (Digital) > Decode (2-tone 1 to 4))
5 INDICATION AND DISPLAY
5.4 Optional Signaling LED
Common FUNC (K, F)/Ver 2.20 90
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English