EasyManuals Logo

Kenwood NX-5200K3 Common Function Reference

Kenwood NX-5200K3
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #196 background imageLoading...
Page #196 background image
If 10 minutes elapse after recording starts and the transceiver exits Voice Memo Mode, a Record Stopped Tone (4 beeps)
sounds from the transceiver, and “Record Stopped” appears on the display for 2 sec.
Menu Zone
+
Zone 1
Channel 1
12 : 34
A
M
Record Stopped
Note
0
Recording
does not start if the conditions for storing data in the microSD card are not satisfied. (Refer to Conditions that
enables audio data file and GPS data file to be stored in a microSD card.)
0
Voice Memo records audio to the microSD card. Therefore, while recognition of the microSD card is not completed, while
the microSD card is formatted, or while an audio file is deleted, a Key-entry Error Tone (1 beep) sounds from the
transceiver and recording does not start even if the Voice Memo key is pressed.
0
The maximum length of recording time is 10 minutes.
0
Mode Reset Timer is extended while the transceiver is in Voice Memo Mode. Also, the VOX function is temporarily
disabled.
0
If the transceiver receives a request message for GPS data by using wireless communication while in Voice Memo Mode,
the transceiver sends the GPS data to the base station after the transceiver exits Voice Memo Mode. (Refer to Storing
the GPS Data (GPS Data Storage).)
0
If Voice Memo is used with other functions such as GPS Data Storage, the beginning may be missing from the audio
recorded by Voice Memo.
About the Audio to Be Recorded
The following audio is recorded while the transceiver is in Voice Memo Mode.
Portable:
If a speaker microphone (such as KMC-54WD) is connected to the transceiver, the audio inputted to the microphone of
the speaker microphone is recorded. If a speaker microphone is not connected, the audio inputted to the microphone of
the transceiver is recorded.
Mobile:
The audio inputted to the Mic Line is recorded.
Note
0
The inputted audio is recorded even if a Bluetooth-compatible headset is connected to the transceiver.
0
For Mobile, the audio path of the Mic Line changes according to the configuration in Control Head Mic Input. (Refer to
Selecting the Audio Input Line If Detaching and Using Control Head (Control Head Mic Input).)
9 STORING RECORDED AUDIO/ GPS DATA
9.3 Recording Audio to a microSD Card (Voice Memo)
Common FUNC (K, F)/Ver 2.20 165
CONTENTS INDEX

Table of Contents

Other manuals for Kenwood NX-5200K3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood NX-5200K3 and is the answer not in the manual?

Kenwood NX-5200K3 Specifications

General IconGeneral
BrandKenwood
ModelNX-5200K3
CategoryTransceiver
LanguageEnglish

Related product manuals