Kenwood NX-5200K3 Common Function Reference

Configuring the Storage Method of an Audio Data File (First-in First-out Deletion)
First-in First-out Deletion is
the function to delete the oldest audio data file in order to store a new audio data file if the full
capacity of the microSD card or the full capacity of the internal memory has been used.
The transceiver behaves as follows according to the configuration in First-in First-out Deletion:
Table 9-3 First-in First-out Deletion
Configuration Description
Enabled
The transceiver deletes the oldest audio data file in the oldest folder and stores a new audio data
file in the microSD card.
The
transceiver deletes the oldest audio data file stored in the internal memory and stores a new
audio data file in the internal memory.
When the transceiver is turned OFF by the Power switch, the transceiver backs up the audio data
recorded by Auto Recording.
Disabled
The audio data files stored in the microSD card or the internal memory are not deleted. The
transceiver cannot record.
The transceiver backs up the audio data each time the transceiver records by Auto Recording.
Configuration using KPG-D1/ D1N
Configuring First-in
First-out Deletion (
Transceiver Settings > Optional Features > Optional Features 2 > microSD/
Memory)
9 STORING RECORDED AUDIO/ GPS DATA
9.1 About microSD Card
Common FUNC (K, F)/Ver 2.20 159
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English