Kenwood NX-5200K3 Common Function Reference

Configuring the Offset Value for Volume Level (Tone Volume Offset)
Tone Volume Offset is the function to adjust how much the standard tone volume level can be increased or decreased
from the fixed volume position. This function can be used to adjust the volume level of a tone depending on the situation.
Configuration using KPG-D1/ D1N
Configuring Tone
Volume Offset (
Transceiver Settings > Optional Features > Optional Features 1 > Sound > Tone
Volume)
Configuring the Volume Level of Various Tones (Tone Volume)
Tone Volume
is the function to adjust the volume level of various tones.
This function can be used to maintain the volume level of the tones at a constant level depending on the situation or mute
tones.
Tone Volume for the following tones can be configured using KPG-D1/ D1N:
0
Power-on Tone
0
Control Tone
0
Warning Tone
0
Alert Tone
0
Sidetone
0
Locator Tone
The following are the types of Tone Volume that can be configured:
Table 6-12 Available Tone Volume
Tone Volume Description
Current The Tone Volume varies in conjunction with the current volume level.
1 to 31
The tone sounds from the transceiver with a fixed tone volume. Higher values result in greater
volume.
Off The tone does not sound from the transceiver.
Selectable
The tone volume varies in conjunction with the Fixed Volume
key. (Refer to Changing the Tone
Volume Level with a Single Touch (Selectable Tone Level).)
Configuration using KPG-D1/ D1N
Configuring Tone Volume of
each tone (
Transceiver
Settings > Optional Features > Optional Features 1 > Sound
> Tone Volume)
6 SOUND
6.4 Functions Related to the Volume Configuration
Common FUNC (K, F)/Ver 2.20 121
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English