DMR Conventional
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
Individual Call.
Alert Tone (Group Call)
This tone sounds from the transceiver when the transceiver receives a Group
Call.
Alert Tone (Broadcast Group Call)
This tone sounds from the transceiver when the transceiver receives a
Broadcast Group Call.
Alert Tone (Paging Call)
This tone sounds from the transceiver when the transceiver receives a Paging
Call.
Alert Tone (Status/ Short Message Call)
This tone sounds from the transceiver when the transceiver receives a Status
Call/ Short Message Call.
Alert Tone (Emergency Response)
This tone sounds from the transceiver when the transceiver receives an
Emergency Status.
NXDN Trunking
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
Individual Call in an NXDN Trunking system.
Alert Tone (Individual Call Incoming)
If Automatic
Response is disabled, this tone sounds from the transceiver when
the transceiver receives an Individual Call (Message Trunked (Enhanced)).
Alert Tone (Telephone Individual Call)
This tone sounds from the transceiver when the transceiver receives a
Telephone Individual Call in an NXDN Trunking system.
Alert Tone (Conference Group Call)
This tone sounds from the transceiver when the transceiver receives a
Conference Group Call in an NXDN Trunking system.
Alert Tone (Broadcast Group Call)
This tone sounds from the transceiver when the transceiver receives a
Broadcast Group Call in an NXDN Trunking system.
Alert Tone (Paging Call)
This tone sounds from the transceiver when the transceiver receives a Paging
Call in an NXDN Trunking system.
Alert Tone (Telephone Group Call)
This tone sounds from the transceiver when the transceiver receives a Group
Call from a telephone in an NXDN Trunking system.
Alert Tone (Status/Short Message Call)
This tone sounds from the transceiver when the transceiver receives a Status
Message or a Short Message.
Alert Tone (Emergency Response)
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives an Emergency Call.
DTMF
Alert Tone
This tone sounds from the transceiver when the transceiver receives a call using
a DTMF code.
2-tone
Alert Tone (Analog/ Digital)
This tone sounds from the transceiver when the transceiver receives a call using
a 2-tone code.
MDC-1200
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives an
MDC-1200 Individual Call.
Alert Tone (Group Call)
This tone sounds from the transceiver when the transceiver receives an
MDC-1200 Group Call.
Alert Tone (Fleet Call)
This tone sounds from the transceiver when the transceiver receives an
MDC-1200 Fleet Call.
Alert Tone (All Call)
This tone sounds from the transceiver when the transceiver receives an
MDC-1200 All Call.
6 SOUND
6.2 Tones that Sound When the Transceiver Receives a Call
Common FUNC (K, F)/Ver 2.20 115
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
