Kenwood NX-5200K3 Common Function Reference

FleetSync
Alert Tone (Individual Call)
This tone sounds from the transceiver when the transceiver receives a
FleetSync Individual Call.
Alert Tone (Other Selective Calls)
This tone sounds from the transceiver when the transceiver receives a
FleetSync Group Call, FleetSync Fleet Call, FleetSync Supervisor Call or
FleetSync Broadcast Call.
Alert Tone (Paging Call)
This tone sounds from the transceiver when the transceiver receives a
FleetSync Paging Call.
Alert Tone (Status/Short Message Call)
This tone sounds from the transceiver when the transceiver receives a
FleetSync Status/Short Message Call.
Alert Tone (Emergency Response)
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives a FleetSync Emergency
Call.
Configuration using KPG-D1/ D1N
0
Configuring various Alert Tones (P25 Conventional) ( Transceiver Settings > P25 > P25 Information >
Conventional > Alert Tone)
0
Configuring various Alert Tones (P25 Trunking) ( Transceiver Settings > P25 > P25 Information > Trunking >
Alert Tone)
0
Configuring various Alert Tones (NXDN Conventional) ( Transceiver Settings > NXDN > NXDN Information >
Conventional > Alert Tone)
0
Configuring various Alert Tones (DMR Conventional) (
Transceiver Settings > DMR > DMR Information >
Conventional > Alert Tone)
0
Configuring
various Alert Tones (NXDN Trunking) (
Transceiver Settings > NXDN > NXDN Information > Trunking
> Alert Tone)
0
Configuring various Alert Tones (DTMF) ( Transceiver Settings > DTMF > Decode)
0
Configuring various Alert Tones (2-tone (Analog)) ( Transceiver Settings > 2-tone > 2-tone (Analog) > Decode
(2-tone 1 to 4))
0
Configuring
various Alert Tones (2-tone (Digital)) (
Transceiver Settings > 2-tone > 2-tone (Digital) > Decode (2-
tone 1 to 4))
0
Configuring various Alert Tones (2-tone (MDC-1200)) (
Transceiver Settings > MDC-1200 > MDC-1200
Information > General > Call Alert > Alert Tone)
0
Configuring
various Alert Tones (2-tone (FleetSync)) (
Transceiver Settings > FleetSync > FleetSync Information
> General > Alert Tone)
6 SOUND
6.2 Tones that Sound When the Transceiver Receives a Call
Common FUNC (K, F)/Ver 2.20 116
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English