Kenwood NX-5200K3 Common Function Reference

0
Even if Public Address is enabled and the PTT
switch is pressed while Dropout Delay Time or Dwell Time of Scan is
counting down, the timer is not extended.
0
If Public Address is enabled and the PTT switch is pressed while the Auto Reset Timer of each call is counting down,
the Auto Reset Timer extends while the PTT switch is pressed and held.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Transceiver Settings > Key Assignment)
About the Speaker to Emit Audio
While Public
Address is enabled, the speaker to emit audio when the PTT switch is pressed and the speaker to emit audio
when an audio signal is received with the PTT switch released are as follows:
Table 6-13 Speaker to Emit Audio When Public Address Is Used
Connection Status of
KES-5
Connection Status of
KES-3
Speaker to Emit Audio
When the PTT Switch Is Pressed
When an Audio Signal Is
Received with the PTT Switch
Released
Connected via KAP-2
(4-5 Pin Short)
Connected KES-5
KES-3 or the internal speaker
*1
Disconnected KES-5 Internal Speaker
Connected via KAP-2
(5-6 Pin Short)
Connected KES-5 KES-5
Disconnected KES-5 KES-5
Disconnected
Connected KES-3
KES-3 or the internal speaker
*1
Disconnected
KCH-19 (Basic Panel)/ KCH-20R
(Featured Panel):
Internal Speaker
KCH-21R (Handheld Control
Head):
No speaker to emit audio
Internal Speaker
*1
Depends on the configuration in External Speaker.
6 SOUND
6.5 Using the Transceiver as a Megaphone (Public Address)
Common FUNC (K, F)/Ver 2.20 124
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English