Kenwood NX-5200K3 Common Function Reference

Table 7-2 Battery Status Icon (Portable only)
Icons Status
Full
Sufficient
Low
(Flashing)
Very Low
Configuration using KPG-D1/ D1N
Configuring Battery Indicator ( Transceiver Settings > Optional Features > Optional Features 1 > Battery)
7.2
Warning that the Battery Voltage Is Low (Battery Warning)
Supported Models: Portable
Battery Warning can
be used to notify a user by emitting a beep or flashing the LED when the remaining battery power is
low.
The transceiver always monitors whether the battery voltage goes low and notifies a user that the remaining battery power
is low according to the configuration in Battery Indicator when the battery voltage level goes lower than the warning voltage
level. (Refer to Displaying the Remaining Battery Power Level (Battery Indicator).)
Table 7-3 Battery Warning
Configuration Description
While Transmitting
The transceiver detects that the battery voltage is low while transmitting. When the battery voltage
level goes lower than the warning voltage level (6.2 V), the transceiver notifies a user that the
remaining battery power is low by a flashing red Transmit LED.
Always
The transceiver always detects whether the battery voltage goes low while the transceiver is in
use. When the battery voltage goes below the warning voltage level (during transmission: 6.2 V,
non-transmission: 7.0 V), the transceiver notifies a user that the remaining battery power is low
according to the Battery Indicator configuration by changing the “Battery Status” icon, and by
flashing a red Transmit LED.
Always - Late Warning
The transceiver always detects whether the battery voltage goes low while the transceiver is in
use. When the battery voltage goes below the warning voltage level (during transmission: 6.2 V,
non-transmission: 6.5 V), the transceiver notifies a user that the remaining battery power is low
according to the Battery Indicator configuration by changing the “Battery Status” icon, and by
flashing a red Transmit LED.
Also, if Battery
Warning Tone is enabled, the transceiver notifies a user that the remaining battery power is low by making
the Battery Warning Tone (3 beeps) sound from the transceiver if the PTT switch is not pressed when the battery voltage
level goes lower than the warning voltage level.
Note
This function cannot be activated if “Off” has been configured in Battery Indicator.
Configuration using KPG-D1/ D1N
0
Configuring Battery Warning ( Transceiver Settings > Optional Features > Optional Features 1 > Battery)
0
Configuring Battery Warning Tone to be enabled or disabled ( Transceiver Settings > Optional Features >
Optional Features 1 > Battery)
7 BATTERY
7.1 Displaying the Remaining Battery Power Level (Battery Indicator)
Common FUNC (K, F)/Ver 2.20 145
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English