7.6
Displaying the Remaining Battery Power When the
Transceiver Is Turned ON (Power-on Battery Information)
Supported Models: Portable
Power-on
Battery Information is the function to display the remaining capacity of an Intelligent Battery when the transceiver
is turned ON. When using the transceiver, the remaining capacity of the battery can be checked with greater accuracy than
the Battery Status icon.
If Battery Information is enabled, the remaining capacity of an Intelligent Battery appears for 2 sec when the transceiver
is turned ON.
Note
When the transceiver is turned ON, the remaining capacity of the battery does not appear when the information of an
Intelligent Battery cannot be acquired, such as when the transceiver is turned ON while the transceiver is connected to
the battery charger or when a battery other than an Intelligent Battery is used.
Configuration using KPG-D1/ D1N
Configuring Battery Information to be enabled or disabled (
Transceiver Settings > Optional Features > Optional
Features 1 > Power-on)
7 BATTERY
7.6 Displaying the Remaining Battery Power When the Transceiver Is Turned ON (Power-on Battery Information)
Common FUNC (K, F)/Ver 2.20 148
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
