0
If KCH-19 is not attached to the RF Deck:
1
Connect the transceiver to the PC by using the KPG-46X programming cable.
The screen to confirm whether to enter SD Card Direct
Access Mode appears.
2
Press the [
] or [ ] key to select “Start”, and then press the Menu ([ ]) or [ ] key.
A Key Beep A (1 beep) sounds from the transceiver, and a
caution message appears.
3
Press the Menu ([
]) or [ ] key.
A Key Beep A (1 beep) sounds from the transceiver, and then
the transceiver enters SD Card Direct Access Mode.
If
a microSD card is inserted in the SD card slot, the “
” icon
appears.
12 : 34
A
M
OK
SD Access 1
Cannel
Start
12 : 34
A
M
OK
SD Access
Extended Access
Time Required.
0
If multiple SD card slots exist (Mobile only):
1
Connect the transceiver to the PC by using the KPG-46X programming cable.
The screen to confirm whether to enter SD Card Direct
Access Mode appears.
12 : 34
A
M
OK
SD Access 1
Cannel
Start
9 STORING RECORDED AUDIO/ GPS DATA
9.6 Confirming microSD Card Contents via a PC (SD Card Direct Access)
Common FUNC (K, F)/Ver 2.20 174
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
