About the Displayed Contents of a Bluetooth-compatible Device
A found Bluetooth-compatible device is displayed in the format of either the Bluetooth device name, Bluetooth device
address, or device class. Pressing the
[G] key or [H] key can switch the display.
Bluetooth device name:
The name of the Bluetooth-compatible device. The name of the Bluetooth-compatible device appears as a maximum 14-
character ASCII code on the display of the transceiver. Therefore, if the name of a found Bluetooth-compatible device is
15 characters or more, the first 14 characters are displayed. If non-ASCII code characters are used, these characters are
blank.
Bluetooth device address:
The unique address of the Bluetooth-compatible device. The Bluetooth device address appears as 12 hexadecimal digits
on the display of the transceiver.
Device class:
The type of the Bluetooth-compatible device. The device class is displayed by the following icons: If the device cannot
be classified even in the following table, the device class is “Other Device”. The device class of the transceiver is “Phone”.
Table 10-1 Device Class
Device Class
Icons
Disconnected Connected
Computer
Phone
Audio/Video
LAN/Network
Peripheral
Imaging
Wearable
Toy
Health
Note
0
The device class of the transceiver is “Phone”.
0
If the device class is “Other Device”, the icon is “ ” or “ ”.
0
The device class icon of a Bluetooth-compatible device registered using the Bluetooth Connect / Disconnect key is
“ ” or “ ”.
10 BLUETOOTH COMMUNICATION
10.2 Finding a Bluetooth-compatible Device (Bluetooth Find Device)
Common FUNC (K, F)/Ver 2.20 179
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
