Kenwood NX-5200K3 Common Function Reference

9
Click the “Write” button.
RF Deck Selection
appears.
Select “RF Deck Data A”, the data for VHF, from FPU Data Selection of RF Deck 1.
Figure 16-10 RF Deck Selection
10
Click the “OK” button in RF Deck Selection.
Write Data to the Transceiver appears and writing can be executed.
Figure 16-11 Write Data to the Transceiver
11
With
the same procedure as step 8 to step 10, write FPU data for UHF to RF Deck 2 and for 700/ 800 MHz to
RF Deck 3.
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.4 Configuring the Initial Configuration
Common FUNC (K, F)/Ver 2.20 255
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English