Note
0
For Dual Control Head, basically all Control Heads display the same contents (display mirroring). However, as an
exception, display mirroring may be disabled.
0
For
Dual Control Head, the LEDs of all Control Heads function together. The LED lights green when receiving and lights
red when transmitting.
0
The functions can be configured for each key for each Control Head; therefore, the display of Key Guide may differ from
the key assignment.
RF Deck Select
In a Multi RF Deck system, the Selected RF Deck can be manually switched from a Control Head. The configurations of RF
Decks can be changed by any of the following key operations:
1. By
assigning “RF Deck 1”, “RF Deck 2”, and “RF Deck 3” to the PF keys, the Selected RF Deck can be switched directly.
2. By assigning “RF Deck Select” to the PF key, the Selected RF Deck can be switched sequentially as follows:
In a Triple RF Deck structure:
Pressing the RF Deck Select key switches the Selected RF Deck as follows:
RF Deck 1
RF Deck 2
RF Deck 3
RF Deck Select key
Key Beep A
RF Deck Select key
Key Beep A
RF Deck Select key
Rollover Tone
Figure 16-25 RF Deck Select (Triple RF Deck)
In a Dual RF Deck structure:
Pressing the RF Deck Select key switches the Selected RF Deck as follows:
RF Deck 1
RF Deck 2
RF Deck Select key
Key Beep A
RF Deck Select key
Rollover Tone
Figure 16-26 RF Deck Select (Dual RF Deck)
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.5 Basic Operations
Common FUNC (K, F)/Ver 2.20 265
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
