If “Control Head 1” is configured in Control Head for VOX:
The
VOX function is executed using the headset connected to Control Head 1. If the headset is not connected to Control
Head 1, VOX does not function.
Or, when Cancel Operation is enabled, executing any of the following operations disables VOX of whole Multi RF Deck/
Multi Control Head.
0
Pressing the PTT switch of Control Head 1
0
The External PTT (Voice) port (AUX Input) of the Selected RF Deck goes low level
0
Pressing the PTT switch of the headset connected to Control Head 1
If “Control Head 2” is configured in Control Head for VOX:
The VOX function is executed using the headset connected to Control Head 2. If the headset is not connected to Control
Head 2, VOX does not function.
Or, when Cancel Operation is enabled, executing any of the following operations disables VOX of whole Multi RF Deck/
Multi Control Head.
0
Pressing the PTT switch of Control Head 2
0
The External PTT (Voice) port (AUX Input) of the Selected RF Deck goes low level
0
Pressing the PTT switch of the headset connected to Control Head 2
Audio Input
VOX Transmission
KRK-15B
RF Deck 1
(Selected)
KRK-15B
RF Deck 2
(Unselected)
KRK-15B
RF Deck 3
(Unselected)
Figure 16-74 VOX Transmission (Control Head)
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.16 Bluetooth Communication
Common FUNC (K, F)/Ver 2.20 311
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
