Kenwood NX-5200K3 Common Function Reference

Configuration Description
Individual + Short
Message
NXDN system:
Pressing the [0]
to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
an NXDN system. In Individual Call Mode, a call can be initiated by selecting an Individual ID
configured in the Individual ID List or directly entering an Individual ID. Then, pressing the [F] key
while the transceiver is in Individual Call Mode allows the transceiver to enter Short Message
Mode. In Short Message Mode, a Short Message can be sent by directly entering a Short Message.
P25 system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
a P25 system. In Individual Call Mode, a call can be initiated by selecting an Individual ID
configured in the Individual ID List or directly entering an Individual ID.
Then, in a P25 Conventional system, pressing the [F] key while the transceiver is in Individual
Call Mode allows the transceiver to enter Short Message Mode. In Short Message Mode, a Short
Message can be sent by directly entering a Short Message.
DMR Conventional system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
a DMR Conventional system.
In Individual Call Mode, a call can be initiated by selecting an Individual ID configured in the
Individual ID List or directly entering an Individual ID. Then, pressing the [F] key while the
transceiver is in Individual Call Mode allows the transceiver to enter Short Message Mode. In Short
Message Mode, a Short Message can be sent by directly entering a Short Message.
Individual + Status
NXDN system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
an NXDN system. In Individual Call Mode, a call can be initiated by selecting an Individual ID
configured
in the Individual ID List or directly entering an Individual ID. Then, pressing the [F] key
while the transceiver is in Individual Call Mode allows the transceiver to enter Status Mode. In
Status Mode, a Status Message can be sent by selecting a status configured in NXDN Status List
or directly entering a status number.
P25 system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
a P25 system. In Individual Call Mode, a call can be initiated by selecting an Individual ID
configured in the Individual ID List or directly entering an Individual ID.
DMR Conventional system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in
a DMR Conventional system.
In Individual Call Mode, a call can be initiated by selecting an Individual ID configured in the
Individual ID List or directly entering an Individual ID. Then, pressing the [F] key while the
transceiver is in Individual Call Mode allows the transceiver to enter Status Mode. In Status Mode,
a status can be sent by selecting a status configured in the DMR Status List or directly entering a
status.
Group
NXDN Conventional system:
Pressing the [0]
to [9] keys on the keypad allows the transceiver to enter Group Call Mode in an
NXDN Conventional system. In Group Call Mode, a Group Call can be initiated by selecting a
Group ID registered in the Group ID List.
P25 Conventional system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Talkgroup ID Select
Mode in a P25 Conventional system. In Talkgroup ID Select Mode, the Talkgroup ID configured
for a channel can be changed.
DMR Conventional system:
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Group Call Mode in a
DMR Conventional system. In Group Call Mode, a Group Call can be initiated by selecting a Group
ID registered in the Group ID List.
3 BASIC OPERATIONS
3.3 Using Function Keys
Common FUNC (K, F)/Ver 2.20 34
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English