Configuring the Display Order of Data in Stack Mode (Stack Order)
Stack Order is the display order of data in Stack Mode.
Depending on the configuration of Stack Order, the data is displayed in Stack Mode as follows:
Table 3-8 Stack Order
Configuration Description
Descending The newest data appears on the first line of the list.
Ascending The oldest data appears on the first line of the list.
Configuration using KPG-D1/ D1N
Configuring Stack Order
(
Transceiver Settings > Optional Features > Optional Features 1 > Stack)
Enabling the Storage of Redundant Data (Repeated Calls Stack)
Repeated Calls Stack is the function to enable the storage of redundant data.
If Repeated Calls Stack is enabled, a Caller ID or message is stored as new data in the stack memory of the transceiver
even if the same Caller ID or message has been previously received.
Configuration using KPG-D1/ D1N
Configuring Repeated
Calls Stack to be enabled or disabled (
Transceiver
Settings > Optional Features > Optional
Features 1 > Stack)
Displaying the Caller ID when Displaying a Message (Caller ID for Message)
Caller ID for Message
is the function to display the Caller ID of the stored data when the Status Message or Short Message
is displayed in Stack Mode.
Configuration using KPG-D1/ D1N
Configuring Caller
ID for Message to be enabled or disabled (
Transceiver
Settings > Optional Features > Optional
Features 1 > Stack > Message Display)
3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
Common FUNC (K, F)/Ver 2.20 54
CONTENTS INDEX