Time Stamp
Time Stamp is the function to store a Caller ID, Status Message or Short Message with the stamp of the received time in
the stack memory.
Configuration using KPG-D1/ D1N
Configuring Time Stamp ( Transceiver Settings > Optional Features > Optional Features 1 > Stack > Message
Display)
Message Memory
Message Memory
is the function to retain the stored Caller IDs, Status Messages, or Short Messages in the stack memory
of the transceiver even after the transceiver is turned OFF.
Configuration using KPG-D1/ D1N
Configuring Message Memory (
Transceiver Settings > Optional Features > Optional Features 1 > Stack)
Clear Caller ID Stack on Reply
Clear Caller ID Stack on Reply is
the function to clear a Caller ID from the stack memory of the transceiver if the Caller ID
stored in the stack memory is selected and called.
This function is used if not storing used Caller IDs in the stack memory of the transceiver.
If this function is enabled, a Caller ID is cleared from the stack memory of the transceiver if the Caller ID stored in the stack
memory is selected and called. The Caller ID is cleared from the stack memory even if a call cannot be initiated since the
channel is busy. If the transceiver receives a response from the target party, the Caller ID is not stored in the stack memory
while the Auto Reset Timer is counting down.
Also, the Caller ID of the calling party is store in the stock memory when the transceiver receives a call, but the Caller ID is
cleared from the stack memory if a response is initiated while the Auto Reset Timer is counting down. Subsequently, the
Caller ID is not stored in the stack memory even if a call from the same party is received while the Auto Reset Timer is
counting down.
Configuration using KPG-D1/ D1N
0
Configuring Clear Caller ID Stack on Reply (NXDN) to be enabled or disabled (
Transceiver Settings > NXDN
> NXDN Information > General)
0
Configuring Clear Caller ID Stack on Reply (DMR) to be enabled or disabled ( Transceiver Settings > DMR >
DMR Information > General)
3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
Common FUNC (K, F)/Ver 2.20 57
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
