Kenwood NX-5200K3 Common Function Reference

0
Selecting data from a list by using the keypad (Shortcut Entry)
The following are the operation examples for selecting “ID 0002”, “ID 0024” or “ID 0245” from a Unit ID List in Individual
Call Mode:
Selecting “ID 0002”:
Press the [0] and [2] keys on the keypad in this order, and then press the Menu ([Q]) or [*]
key (OK) to fix.
Selecting “ID 0024”:
Press the [0], [2] and [4] keys on the keypad in this order, and then press the Menu ([Q]) or [*] key (OK) to fix.
Selecting “ID 0245”:
Press the [0], [2], [4], and [5] keys on the keypad in this order.
[0] key
[2] key
[4] key
[5] key
Menu ([ ]) or
[*] key (OK)
Menu ([ ]) or
[*] key (OK)
Menu ([ ]) or
[*] key (OK)
Call
12 : 34
A
M
ID 0001
ID 0002
ID 0003
Back
Individual 0001
OKDelete
Call
12 : 34
A
M
ID 0001
ID 0002
ID 0003
Back
Individual 0002
OK
12 : 34
A
M
List No. __ 02
Delete
Individual 0001
Call
12 : 34
A
M
ID 0024
ID 0025
ID 0026
Back
Individual 0024
OK
12 : 34
A
M
List No. _ 024
Delete
Individual 0001
Call
12 : 34
A
M
ID 0245
ID 0246
ID 0247
Back
Individual 0245
Back ([ ]) or
[#] key (Delete)
Back ([ ]) or
[#] key (Delete)
Back ([ ]) or
[#] key (Delete)
OK
12 : 34
A
M
List No. ___ 0
Delete
Individual 0001
Note
0
The following are the main keys to be used for these operation examples:
To determine: the Menu ([Q]) or [*] key
To delete one character: the Back
([O]) or [#] key
0
The number of digits to be entered varies as follows depending on the highest list number configured in the transceiver:
0
If the highest list number is lower than 10: one digit
0
If the highest list number is 10 or higher and lower than 100: two digits
0
If the highest list number is 100 or higher and lower than 1000: three digits
0
If the highest list number is 1000 or higher: four digits
0
If the entered number does not exist when it is determined, the transceiver restores the previous display prior to entering
the number.
0
The displays above are the displays when Individual Call Acknowledge Request in an NXDN Conventional system is
enabled.
3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
Common FUNC (K, F)/Ver 2.20 59
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English