Keysight B2980B User’s Guide, Edition 1 187
Front Panel Reference
File Key Group
File Key Group
Press the File key to display the following softkeys for saving a file on and loading
a file from a USB flash drive connected to the front panel USB-A connector.
Save Displays the following softkeys for saving a file. Press a softkey to display the File
Selection dialog box. See “File Selection Dialog Box” on page 187.
Measure Saves a measurement data file.
Math Saves a math result data file.
Limit Test Saves a limit test result data file.
Trace Saves a trace buffer data file.
Config Saves a system setting data file.
Load Displays the following softkey for loading a file. Press the softkey to display the
File Selection dialog box. See “File Selection Dialog Box” on page 187.
Config Loads a system setting data file.
License Loads a license file.
The license file enables the functions secured by license. To get the file, follow
instructions described in the Software Entitlement Certificate sheet supplied with
a license product.
File Selection Dialog Box
This dialog box provides the following GUI for saving or loading a file.
Pressing the rotary knob switches the status EDIT and MOVE.
To select a file, change the status to EDIT, and use the rotary knob, assist keys,
function keys, and helper panel.
Path Folder name for saving or loading a file.
File Name File name to save or load.
To Next Page
Loading...
Need help?
General
