Keysight B2980B User’s Guide, Edition 1 189
Front Panel Reference
Program Key Group
Program Key Group
Press the Program key to display the following softkeys for setting and controlling
the program memory. For details on the program memory, see “Program Memory”
on page 236.
The program memory can be defined by using the SCPI commands while the
B2980 is in the remote mode.
Catalog Displays the Program Catalog dialog box which lists the programs saved in the
program memory. This dialog box is also used to specify the memory program to
use. To select a memory program, highlight its name in this list.
View Displays the Program View dialog box which shows the program code of the
specified program.
Variable Displays the Variable dialog box which lists the variables used in the memory
programs. Available index is 1 to 100.
Control Displays the following softkeys for controlling the operation of the program
memory.
The current status can be known by an asterisk (*) on the softkey label.
Run Starts the specified memory program.
Pause Pauses the execution of the memory program.
Step Starts the step execution of the specified memory program.
Stop Stops the execution of the memory program.
Continue Continues the execution of the memory program presently
paused.
To Next Page
Loading...
Need help?
General
