242 Keysight B2980B User’s Guide, Edition 1
Function Details
Save/Recall Function
Save/Recall Function
This function saves/recalls the B2980's all setup information by using the front
panel Save and Recall keys. Five storage areas are available in the built-in
non-volatile memory (NVRAM) for this function.
Press the Save or Recall key to display five function keys used for selecting the
storage area. Press a function key to save or recall the setup information.
The label <Empty> is set to the key for the unused storage area and the label
HH:MM:SS (time) is set to the key for the used area. They are displayed on the key
with a destination number (#1 to #5).
Automatic Save/Recall function on B2983B/B2987B
Under battery operation on the B2983B/B2987B, if the battery level is less than 5
%, the instrument automatically saves all setup information and user’s data to the
inside hidden memory location and restores them on next power-on.
To Next Page
Loading...
