Kubota MX5100 - Page 295

5-S9
MX5100, WSM
BRAKES
Brake Disc Wear
1. Measure the brake disc thickness with vernier calipers.
2. If the measurement is less than the allowable limit, replace it.
W10148530
Brake Plate Wear
1. Measure the brake plate thickness with vernier calipers.
2. If the measurement is less than the allowable limit, replace it.
W10149690
Brake disc thickness
Factory spec.
4.6 to 4.8 mm
0.181 to 0.189 in.
Allowable limit
4.2 mm
0.165 in.
Brake Plate thickness
Factory spec.
2.54 to 2.66 mm
0.1000 to 0.1047 in.
Allowable limit
2.1 mm
0.083 in.