EasyManua.ls Logo

Kubota MX5100 - Tire Pressure

Kubota MX5100
454 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G-63
MX5100, WSM
G GENERAL
[3] TIRE PRESSURE
IMPORTANT
Do not use tires other than those approved by LUBOTA
Inflation Pressure
Though the tire pressure is factory-set to the prescribed level, it
naturally drops slowly in the course of time. Thus, check it everyday
and inflate as necessary.
WARNING
Do not attempt to mount a tire on a rim. This should be done
by a qualified person with the proper equipment.
Always maintain the correct tire pressure.
Do not inflate tires above the recommended pressure shown
in the operator’s manual.
W10440050
Tire sizes Inflation Pressure
Rear
13.6 – 28, 4 PR 150 kPa (1.5 kgf/cm
2
, 22 psi)
14.9 – 26, 4 PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
17.5L – 24, 6 PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
44 × 18 – 20, 6 PR 170 kPa (1.7 kgf/cm
2
, 24 psi)
610R470, 6PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
Front
9.5 – 16, 4 PR 205 kPa (2.1 kgf/cm
2
, 30 psi)
7.5L – 15, 6 PR 220 kPa (2.2 kgf/cm
2
, 32 psi)
9.5L – 15, 6 PR 235 kPa (2.4 kgf/cm
2
, 34 psi)
12 – 16.5, 6 PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
29 × 12.50 – 15, 4 PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
305R343, 2PR 70 kPa (0.7 kgf/cm
2
, 10 psi)
(1) Ground (A) Insufficient
(B) Standard
(C) Excessive

Table of Contents

Related product manuals