Kubota MX5100 - 4 Checking, Disassembling and Servicing; Checking, Disassembling and Assembling; Hydraulic Pump Test Using Flow-Meter (Power Steering)

8-S7
MX5100, WSM
HYDRAULIC SYSTEM
4. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING, DISASSEMBLING AND ASSEMBLING
(1) Hydraulic Pump Test Using Flow-meter (Power Steering)
Preparation
1. Open the bonnet.
2. Remove the delivery pipe joint bolt (2) and power steering main
delivery hose (3).
(When reassembling)
• Install the copper washers firmly.
W1012497
Tightening torque
Power steering main
delivery pipe joint bolt
49.0 to 58.8 N·m
5.0 to 6.0 kgf·m
36.2 to 43.4 lbf·ft
(1) Power Steering Main Delivery Hose
(2) Hydraulic Pump
(3) Delivery Pipe Joint Bolt